Chris Alston's Chassisworks Brands Chassisworks VariShock KP Components Total Control Products
  | Steering | Front Suspension | Rear Suspension | Chassis | Engine/Trans | Billet | VariShocks | Drivetrain | Brakes |  
  | New Parts | Applications | Catalog | Support | System Guides | Order Online | Order Phone: (888) 388-0298  

Home Products Rear Suspension Components

Rear Suspension Components

Rear Suspension SystemsRear Suspension Systems
This section lists complete suspension systems such as our rear pushrod coil-over, or g-Bar systems.

FAB9 Leaf-Spring Rearend HousingsFAB9 Leaf-Spring Rear End Housings

Direct-fit FAB9 fabricated housings are available for most models of leaf-spring equipped Mustangs, Cougars, Falcons, and Comets from 1960 through 1973.

FAB9 Leaf-Spring Rearend HousingsPanhard Bar System

Our panhard bar system for leaf-spring suspensions greatly improves vehicle handling response by providing superior control over side-to-side movement of the rearend housing.

9" Housing Torque ArmFord Housing Torque Arm

The TCP Torque Arm is a bolt-on, Pinion angle adjustable, traction device that can be used with our rear pushrod or factory leaf spring suspensions.

Leaf SpringsLeaf Springs

Our leaf springs are available in two modified-eye styles and three-separate spring configurations

Rear Anti-Roll BarAnti-Roll Bar

The solid anti-roll bar measures 3/4 and features multiple endlink mounting holes for a total of three incremental rate adjustments.

VariShock Bolt-InsVariShock Bolt-Ins

USA made, factory-replacement performance shock absorbers that provide the ride quality and performance you need in street and autocross applications.

Leaf Spring PlatesLeaf Spring Plates

Our direct replacement leaf spring plates feature an integrated tiedown loop for added convenience when securing a vehicle to a trailer.

Leaf-Spring BushingsLeaf-Spring Bushings

Total Control leaf-spring, polyurethane bushing sets provide a more stable interface between the leaf springs and the chassis.

U-Bolt SetU-Bolt Set

Recommended for use with LSP-01 or LSP-02 leaf-spring plates as the stock leaf-spring plates will not accept these larger diameter u-bolts.

Billet Vent CanisterBillet-Aluminum Vent Canister

Our top-quality, billet-aluminum vent canister system for gas tanks, rear ends and transmissions features a selection of mounting bracket and hoses kit options for greater installation flexibility.

Billet Vent CanisterRemote Breather Vent Kit

Provides components to add a -8 AN size, 40-micron sintered bronze vent to a fuel tank, rear axle housing or transmission, without routing through a reservoir canister.


All specifications and prices listed throughout the website and linked documents are subject to change.


WARNING: Cancer and Reproductive Harm -


Home | Products | Support | Features | Contact | Site Map | Terms | Privacy | Press

© 2018 Total Control Products - A Chris Alston's Chassisworks, Inc. Brand

Toll Free: 888.388.0298